电解电容型号众多，即便是外观相同的电解电容，其电压和容量也可能不同，所使用的地方和用途也大大不同，山东红宝电子一直坚持在出库前会进行二次检测，以保证电解电容的质量。电解电容检测过程包括：
there are many types of electrolytic capacitors. even if the electrolytic capacitors with the same appearance, their voltage and capacity may be different, and the places and uses used are also greatly different. shandong hongbao electronics always insists on conducting secondary detection before leaving the warehouse to ensure the quality of electrolytic capacitors. the detection process of electrolytic capacitor includes:
1.qc检测台，要求电解电容出货前必须检测，达到以下标准才为合格品。测试电压不低于额定电压1.3倍，容量在±20%的范围以内，未达到以上标准，不准发货！如果不按要求检测导致客户货物质量出现问题仓库质检人员自行承担损失。
qc test bench, it is required that the electrolytic capacitor must be tested before delivery, and the qualified product can only meet the following standards. the test voltage shall not be less than 1.3 times of rated voltage, and the capacity shall be within ± 20%. if the test voltage fails to meet the above standards, shipment is not allowed! if the customer's goods are not inspected according to the requirements, the warehouse quality inspector shall bear the loss.
2.电容电压检测：入库和出货前的电压检测，严格把控在额定电压的1.3倍以上。
capacitance voltage detection: the voltage detection before storage and delivery should be strictly controlled at 1.3 times of the rated voltage.
3.电容容量检测：入库和出货前的容量测试，严格把控在±20%数值内，不达标坚决不发货。
capacitance capacity test: the capacity test before storage and delivery shall be strictly controlled within ± 20%, and the products shall not be delivered if they are not up to standard.
4.仓库入库检测：入库前抽样检查和每月的库存例行检查，是金茂源的一道风景线，确保产品质量能达到客户要求。
warehouse warehousing inspection: sampling inspection before warehousing and monthly inventory routine inspection are a scenic spot of jinmaoyuan to ensure that the product quality can meet customer requirements.
电解电容是损耗性器材，再长时间的放置时，会导致放电漏电的情况，发货前的严格检测，不仅是对顾客的负责也对产品质量的保障。山东红宝电子始终坚持以客户利益为准绳，确保每一件出库的电子元器件的品质达标，更好的服务于广大的企业用户。
electrolytic capacitor is a kind of wear and tear equipment. if it is placed for a long time, it will lead to discharge and leakage. the strict inspection before delivery is not only responsible for the customers, but also the guarantee of product quality. shandong hongbao electronic always adheres to the interests of customers as the criterion to ensure that the quality of each electronic component out of the warehouse reaches the standard and better serves the majority of enterprise users.